JDS Uniphase DSAM-3500, User Manual

Page: 258 / 362

Chapter 9 Measure Mode – Service Tab
DOCSIS
218 DSAM Help User Guide Rev. 001
– Packets sent and lost
– Average round trip time
– Loss to sent ratio
To run a ping test
1 Press the View softkey.
2 Using the arrow keys, select Ping .
3 Press ENTER .
4 Using the arrow keys, select the IP Address option.
5 Press ENTER .
6 Using the arrow keys, select the IP address you want to ping.
7 Press ENTER .
8 Using the arrow keys, select Packet Size (bytes) .
9 Press ENTER .
10 Using the arrow keys, select the packet size you want to send.
11 Press ENTER .
Figure 196 Measure Mode – DOCSIS Ping Test
NOTE
To add, modify or delete an IP address, see “Adding Ping IP
Addresses” on page 220 , “Modifying Ping IP Addresses” on
page 220 , or “Deleting Ping IP Addresses” on page 221 .
21128026 R001 DSAM Help User Guide.book Page 218 Thursday, February 5, 2009 2:02 PM