Chapter 7
AutoTest Mode
AutoTests Tab
124
DSAM Help User Guide
Rev. 001
13
Press the
Settings
softkey.
14
To select Edit Test Point Compensation, press
ENTER
. (For
detailed instructions on choosing a TPC plan see
15
Using the arrow keys, select a
TPC plan
.
16
Press the
Done
softkey.
17
Press the
Start
softkey.
The AutoTest in Progress screen is displayed.
The results appear on the Video AutoTest screen.
Figure 116
AutoTest – AutoTest in Progress
NOTE
The Help system is disabled during all tests while they are in prog-
ress.
To stop the test, press the
Stop
softkey.
NOTE
To save the results to a file, press the
Save
softkey then follow
under
If you chose the wrong limit set before conducting the test, press
the
Limits
softkey and select a different limit set to view your test
results in relation to a different limit set without rerunning the test.
21128026 R001 DSAM Help User Guide.book Page 124 Thursday, February 5, 2009 2:02 PM
