Switching.on.the.dispenser
Caution:
Ensure, that the dispenser is
connected to the water supply.
Open the water tap.
Insert the power plug.
The dispenser starts heating up water
and starts cooling down the cooling
compartment. Drink delivery will be
blocked until the water in the boiler has
reached the correct temperature.
A flashing thermometer and the icon
for „Delivery blocked“ will be shown on
the display:
PLEASE.WAIT.
BOILER.IS.
HEATING.UP
Note:
Depending on the dispenser
model (see „Technical
Specifications“) and the ambient
temperature, the heating of the
boiler can take between 30 and
120 minutes. The cooling of the
product compartment can take 24
hours or more.
1.
2.
Once the water has reached the preset
temperature, the display shows the
animated symbol illustrated below.The
dispenser is now ready for operation.
Note:
If the dispenser has been shut
down for longer periods, the date
and time must be set, so that the
dispenser and the programmed
cleaning cycles are reactivated.
The date and time settings are shown
on the display. The option «MONTH»
is active and flashing:
JUN
.29.2007
10:10
Press the buttons ‚UP‘/‘DOWN‘
to select the correct month
(JAN - DEC).
Press the button ‚ENTER‘ to
confirm.
The option «MONTH» stays lit and the
option «DAY» starts to flash:
JUL.
29
.2007
10:10
Press the buttons ‚UP‘/‘DOWN‘
to select the correct day (1-31).
Press the button ‚ENTER‘ to
confirm.
1.
2.
3.
4.
2011 - 01
19
4 OPERATING THE DISPENSER
l