JCM UBA Pro RQ Series, Integration Manual

Page: 35 / 58

Preventive Maintenance UBA Pro RT/RQ™ Series Banknote Recycler Section 5
P/N 960-000209R_Rev. A © 2019, JAPAN CASH MACHINE CO., LTD.
2 5
Table 20 RT/RQ Sensor Cleaning Methods
Sym. Sensors Cleaning Method
A Note Position Sensor A (RT Transport)
Wipe clean using a dry lint free cloth/cotton swab
B Note Position Sensor B (RT Transport)
C Note Position Sensor C (RT Transport)
D Note Position Sensor D (RQ Transport)
E Note Position Sensor E (RQ Transport)
F Note Position Sensor F (RQ Transport)
G
1
Drum 1 Tape Full Empty Sensor 1
(RT/RQ Transport)
Clean using non-flammable Compressed Air
2
Drum 2 Tape Full Empty Sensor 2
(RT/RQ Transport)
H Exit Prism Wipe clean using a dry lint free cloth/cotton swab
I
1 Note Position Sensor 1 (RT Transport)
Wipe clean using a dry lint free cloth/cotton swab
2 Note Position Sensor 2 (RT Transport)
3 Note Position Sensor 3 (RT Transport)
*This sensor is not visible.
Clean using non-flammable Compressed Air
4 Note Position Sensor 4 (RQ Transport)
Wipe clean using a dry lint free cloth/cotton swab 5 Note Position Sensor 5 (RQ Transport)
6 Note Position Sensor 6 (RQ Transport)
NOTE: Wipe and clean all of the Green colored Rollers and Belts shown in Figure 34 using a
slightly damp, lint-free, Micro-fiber cloth. Do not allow liquids or fluids to drip into the Unit, to
minimize the risk of damage or improper performance.