10
•
Hinge open the levers (A) on both
sides of the chair and angle the back
to the desired position by pulling up
or pushing down bar (B).
•
(The back will click into position as
you change the angle.)
•
When the desired back angle has
been reached, hinge closed the
levers to secure the back in place.
Once you have adjusted the seat length, always ensure these points are firmly fixed and
are checked as part of maintenance of the chair.
When mounting the seating system
to a base for the first time, or when an
adjustment has been made to the size of
the system, a stability assessment should
be carried out prior to use of the equipment.
Always ensure that the back is secure and that the levers are tightened before using the
chair.
•
Pull out plungers (A) located on both sides of the seat.
•
Slide the seat in or out to change the length.
•
Release the plungers and continue to slide until the
frame locks into place.
Tip
If increasing the seat depth it is best to stand at the rear of
the chair with the brakes applied and pull the back frame
towards you.
In return you should do the same whilst standing at the
front of the chair to reduce seat depth.
Adjusting Seat Depth
!
!
!
A
A
B
Back Angle Adjustment