P/N 960-100929R_Rev. 7 {EDP #148849}
© 2017, JAPAN CASH MACHINE CO., LTD.
1 - 2
Section 1
iVIZION® Series Next-Generation Banknote Acceptor Unit
General Information
Product Descriptions
Model Descriptions
Table 1-1 lists the product model number
descriptions.
Type Descriptions
Table 1-2 lists the product type number
descriptions.
Software Descriptions
Table 1-3 lists the product type number
descriptions.
Precautions
Symbols in Figure 1-2 are defined as follows:
1.
(Type 1)
Do not insert a torn, folded, or wet
Banknote; it may cause a jam inside the unit.
2.
(Type 2)
Do not expose the unit to water. The unit
contains several precision electronic devices that
can be damaged if water or any liquid is sprayed
or spilled into the unit.
3.
(Type 3)
Do not install the unit in a dusty
environment. Dust may affect/degrade the sen-
sor’s performance.
User Cautions
Careful measures were taken in the design of this
product to ensure its quality; however, the follow-
ing cautions pertain to all users and should be fol-
lowed for safe operation.
Installation Cautions
The Installation Cautions are defined as follows:
1. Do not allow the unit to endure or operate at a
high temperature, in high humidity and/or dusty
environment.
2. Do not install the unit in an area with excessive
vibration or shock present.
3. Unit is not designed for outside installation. Be
sure that the host machine contains enough pro-
tection to avoid wet or dusty conditions when
installing in either an indoor or open-air space.
4. Avoid exposing the unit to direct sunlight/incan-
descent lamp illumination with a gradient angle
of 15 degrees or more, and illumination index of
3,000 Lux or less.
5. Ensure that the host machine is designed for daily
operational access for maintenance and/or clear-
ing a Banknote Jam.
6. Do not use the Validator in environments that
may be subject to extreme temperature changes.
Table 1-1
iVIZION Model Number Specifications
No.
Model: iVIZION - * * * - * *
No
(1)(2)(3) (4)
(1) Validation Head
1: Standard
2 - 9: Reserved
(2)
CPU Board (Memory)
0: Standard
1 - 9: Reserved
(3)
Transport Unit Type
0: Standard
1: SH Specification
2 - 9: Reserved
(4)
Stacker Type
SS: Security Stacker Down
SH: Stacker Horizontal
LD: Less Down (No Stacker)
Table 1-2
iVIZION Type Number Specifications
No.
Type: * * * - 00 - * * * * *
No
(a)(b)(c) (d) (e)(f)(g)(h)(i)
(a)
Box Capacity
*
5: 500 notes (New Banknote)
9: 900 notes (New Banknote)
U: 3000 notes (Street Grade Banknote)
0: No Cash Box
*. The number of stacked Notes depends on the Banknote’s condition.
(b) Box Type
0: Standard
(c)
Box Handle
0: Standard (Blue)
1: Red Handle
(d) Transport Unit Type
00: Standard
(e)
Bezel (Option)
0: Without Bezel
1: With LED Bezel
(f)
ICB (RFID Type)
0: None
1: ICB-Compliant (Standard) (for SS/SH Version Only)
(g)
Optional Board (Memory)
0: None (64M Bit)
1: Memory Extension Board (128M bit)
2: Reserved
(h)
Input/Output Signal Selection
P: Photo-Coupler Isolation (Standard)
R: RS232C
(i)
External Harness Type
Photo-
coupler RS232C USB
0: No Harness
-
-
-
1: Standard Harness
(One side cut, without USB SI/F)
Yes
Yes
N/A
2: Reserved
-
-
-
3: Harness with USB cable 2
(with Connector and USB I/F Cable)
Yes
N/A
Yes
4: SS/SH Harness
(One side cut, without USB I/F)
Yes
Yes
N/A
5: SS/SH Harness 2
(with Connector and USB I/F Cable)
Yes
N/A
Yes
6: Harness (1m one side cut, with USB
I/F Cable and JPL Connector)
Yes
N/A
Yes
Table 1-3
iVIZION Software Number Specifications
No.
Software: iVIZION-* * *-* * * * * - * * * - V *.* *
N
o
(A) (B) (C) (D) (E)
(A) Software Model Name
(B) Denomination (Country Code)
(C) Interface Protocol Name
(D) Software
Version
Figure 1-2
Type 1 Type 2 Type 3
Figure 1-2
Precautionary Symbols
