1257087_Rev1.0
V
‐
LCD
Page
2/6
Programming mode
It allows programming the maneuver of the door.
There are two possible ways of programming the maneuver (with absolute encoder or without it).
Example
1:
Programming
sequence
with
absolute
encoder
BEING ON STANDBY MODE PRESS PROG BUTTON PRESS START BUTTON PRESS PLUS + MINUS 2s
PRESS
↑
BUTTON & KEPT PRESS PLUS + PROG TO PRESS
↓
BUTTON & KEPT PRESS MINUS + PROG TO
TO OPEN DOOR STORE OPENING POSITION TO CLOSE DOOR STORE CLOSING POSITION
Example 2: Programming sequence without absolute encoder
BEING ON STANDBY MODE PRESS PROG BUTTON PRESS PROG BUTTON PRESS PLUS + MINUS 2s
PRESS START BUTTON PRESS START BUTTON PRESS START BUTTON PRESS START BUTTON
DOOR OPENING DOOR OPENED DOOR CLOSING DOOR CLOSED
