background image

Features

Power supply: The equipment is powered with a 12/24Vdc. The device has protective fuse.

Relay Output: The equipment has 2 adjustable open or closed contact relay outputs. These outputs can be programmed to

be activated with different fob channels through cloudAssistant. Moreover, these relays can be remotely activated in real time

with the cloudAssistant.

Inputs: The equipment has 2 inputs to connect 2 limit switches to monitor the door's status (Open/Closed).

Bluetooth receiver module: The equipment has a Bluetooth receiver module to open the door in hands-free mode with a

phone with the HONOA APP. Hands-free activation (BETA function) may be disabled for the entire device in cloudAssistant.

WIFI / GSM Module: The equipment has a WIFI / GSM communication module for connection to the Internet and for remote

opening with a phone with the HONOA APP. Remote opening may be disabled for the entire device in cloudAssistant.

Users: Up to 5000 users managed with cloudAssistant.

Events: Up to 2000 events may be viewed through cloudAssistant. Service available expansion to 5,000 events.

Statistics and information on use: You may use cloudAssistant to view a daily graph of the number of relay activations,

accepted and rejected users, open-door and closed-door events, data consumption, and more.

Light-up signals: The equipment has three LED indicators: "ST", "NW", and "IN" to indicate the cloudAssistant connection

status.

More Information

jcm

technologies

5

Summary of Contents for HONOARELAY

























Reviews: