JCM GLOBAL UBA Pro RT Series, Operation And Maintenance Manual

Page: 69 / 196

P/N 960-000213R_Rev.A © 2020, JAPAN CASH MACHINE CO., LTD.
4 - 5
Disassembly/Reassembly UBA Pro RT/RQ™ Series Banknote Recycler Section 4
5. Remove the single (1) Screw (Figure 4-17 b ).
6. Remove the Flap Home Board (Figure 4-17 c ).
Transport Board Removal
To remove the Transport Board, proceed as fol-
lows:
1. Release the single (1) Locking Tab (Figure 4-18
a ) to remove the FPC Harness (Figure 4-18 b ).
2. Unplug the three (3) Connectors (Figure 4-18 c
1
through c
3
).
3. Remove the two (2) Screws (Figure 4-18 d
1
&
d
2
).
4. Remove the Transport Board (Figure 4-18 e ).
Cylinder Lock Removal
To remove the Cylinder Lock, proceed as follows:
1. Pull and remove the Cylinder Lock (Figure 4-19
a ).
Key Plate Removal
To remove the Key Plate, proceed as follows:
1. Remove the single (1) Screw (Figure 4-20 a ) to
remove the Key Plate (Figure 4-20 b ).
LED Board Removal
To remove the LED Board, proceed as follows:
1. Release the single (1) Locking Tab (Figure 4-21
a ) and remove the LED Board (Figure 4-21 b ).
2. Unplug the FPC Harness (Figure 4-21 c ).
Front Transport Unit Removal
To remove the Front Transport Unit out of the RT
Frame Unit, proceed as follows:
1. Remove the two (2) E-rings (Figure 4-22 a
1
&
a
2
), the two (2) Gears (Figure 4-22 b
1
& b
2
) and
the two (2) Bearings (Figure 4-22 c
1
& c
2
).
Figure 4-17 Flap Home Board Removal (RT
Figure 4-17 Flap Home Board Removal
(RT Frame Unit) 3
b
a
c
Figure 4-18 Transport Board Removal
Figure 4-18 Transport Board Removal
b
c
1
c
2
c
3
d
1
d
2
e
a
Figure 4-19 Cylinder
Figure 4-19 Cylinder Lock Removal
a
RT
a
RQ
Figure 4-20 Key Plate
Figure 4-20 Key Plate Removal
a
RT
RQ
a
b
b
Figure 4-21 LED Board Removal
Figure 4-21 LED Board Removal
b
c
a
Figure 4-22 Front
Figure 4-22 Front Transport Unit Removal
(RT Frame Unit) 1
a
1
b
1
c
1
a
2
b
2
c
2