JCM GLOBAL iVIZION2 Series, Integration Manual

Page: 30 / 54

Section 4 iVIZION™2 Series Banknote Validator Foundation of Intelligent Validation Connector Pin Assign-
P/N 960-000231R_Rev. A © 2022, JAPAN CASH MACHINE CO., LTD.
2 0
Bezel Connector (CN7)
Table 18 Bezel Connector Pin Assignments
Pin No. Signal Name
I/O
*
*. I/O (input/output) is the terminal as viewed from the Unit’s side.
Function
1
NC -
-
2 - -
Polarizing Key
3 NC -
-
4 5V OUT
5V DC Power Supply (Maximum 300mA)
5 VIN OUT
LED Drive Power Supply (to iVIZION2) (Maximum 300mA)
6 GND
SG
†
†. SG = Signal Ground
-
7 LED POWER OUT
LED Power Supply 5V, Current Limitation Resistance (Maximum 20mA )
8 LED 1 IN
LED Drive Line (cathode) Maximum Sink Current: 300mA
Header (Validator): A3B-8PA-2DS (61) (HRS)

Socket Housing (Bezel): A3B-8D-2C (HRS)

Contact Type (Bezel): A3B-2630SCFC (HRS)

Polarizing Key: A3-GPIN (HRS)

Recommended Wire: UL1007 AWG#24-#30
NOTE: The numbers marked on the Bezel
Connector (Socket Housing) and that of
CN7 (see Table 18 below) are differently
located. The Polarizing Key should be
inserted into Pin #4 of the Bezel
Connector.
CN7
Polarize Pin #4
4
8 5
1
7
2
8
1
(Validator CPU Board)
Connector
(Bezel)