background image

4.1 Maintenance 

4.2 Waste disposal pursuant to European      

        Directive 2012/19/UE

T

he fi

 xture should be positioned so that there is not a long 

observation at a distance less than 4 m.

Do not use the lantern if it seems damaged and/or broken.

Restore the original use/reuse conditions.

For spare parts, contact the manufacturer.

Warning! Before carrying out any extraordinary 

maintenance operation, make sure you have switched 

the system’s power off . 

Maintenance operations shall only concern external 

cleaning , the lamp replacement and the control of the 

fastening of the device on the support.

The lamp replacement must be carried out by the 

manufacturer, by its care service or by specialized 

technicians only.

At the end of the useful life of the electrical products and/

or components, do not dispose the product with urban 

waste. 

Take it to the special municipal separate collection points. 

4.3 Compliant packaging pusuant to

        CE Directive 94/62

- 100% fi

 brocartaceo material

- 100% recyclable and biodegradable

- Recyclable material content of the product shall be   

- at least 90 % by weight.

4. Warnings

JCL Lighting

70 rue Louis Armand

ZI Les Milles - BP 144

13794 Aix-En-Provence Cedex 3 

(France)

Tél : 04-42-24-42-41

Fax : 04-42-39-73-55

[email protected]

www.jcllighting.com

JCL LIGHTING - 70 rue Louis Armand - ZI Les Milles - BP 144 - 13794 Aix-en-Provence Cedex 3 (France) - 
Tél : 04-42-24-42-41 - Fax : 04-42-39-73-55 - [email protected] - www.jcllighting.com 

Summary of Contents for Vesta A large

Page 1: ...res Height 319 mm Widht 547 mm Lenght 547 mm Weight 10 kg wiring excluded Exposed area Lateral 0 05 m Pianta 0 20 m Electrical features PF 0 90 Imax Imin 700 mA 200 mA Installation features Work environment Outdoor Assembly position Horizontal Maximum environment temperature 40 C Mounting height 15 m Hygroscopic moisture 0 100 Degree of protection IP 66 collection lightecture up date 2017 02 WARNI...

Page 2: ...ure the safety cord around a tensioned cable and lock it with spring hook Insert the locking clamp in the wire system accessory Lock the lighting fixture through the tightening of the M6 screw coupling torque 5Nm Tighten the nuts for device locking If you need to back tilt Insert the cable into PG16 in the wire system accessory and introduce it inside the luminaire Open the lighting fixture as sho...

Page 3: ... extraction using the Red knobs in Figure 2 loosen the bracket door modules Remove the bracket and pull out the modules LED module LED module placement place the bracket in the slot When in position tighten the plate with red knobs are visible in Picture 2 Inserting driver door driver door bracket place the bracket in position and secure it by tightening the knob nall Allen red in Figure 1 Connect...

Page 4: ...carried out by the manufacturer by its care service or by specialized technicians only At the end of the useful life of the electrical products and or components do not dispose the product with urban waste Take it to the special municipal separate collection points 4 3 Compliant packaging pusuant to CE Directive 94 62 100 fibrocartaceo material 100 recyclable and biodegradable Recyclable material ...

Reviews: