Solar Moon Stake
K331
v001: 15/10/21
Please read and retain these instructions for future reference
ALWAYS POSITION IN DIRECT SUNLIGHT
ASSEMBLY INSTRUCTIONS / INSTRUCTIONS FOR USE:
Unpack the components carefully. Please check all parts have been removed from the
packaging.
Connect the top part with the stake part by twisting it together.
Before using first time
Allow lamp to charge for at least 8 hours in full sunlight with
the ON/OFF switch in the ON position. The ON/OFF switch is
located under the solar panel. Once the batteries are fully
charged, set the ON/OFF switch to ON. If the lamp does not
turn on after dark refer to Maintenance section.
NOTE: In order to verify that the
button is correctly in the “
ON ” position, cover the solar panel with your hand and light
should turn “ON” automatically.
Find an ideal Place for the Solar Light.
Place the solar light in an area where it will receive direct sunlight for at least 8 hours per
day. The number of hours the light will illuminate is directly proportional to the hours of sunlight it receives.
If the light is placed in a shaded area, it will not be able to fully charge and its illumination time will be
limited. Do not place the light near other outdoor lighting like porch or streetlights. These may fool the
sensor and keep the light from coming on, or cause it to turn off automatically
To easily insert stakes into the ground, it is recommended to wet the ground first. To avoid damaging garden
stakes when inserting into the ground, select a spot in soft, rock-free soil. Insert the base of the stake first
then gently insert the rest of the stake into the base. DO NOT push directly against the solar cell or the
ornament housing containing the actual LED light.
Dimensions
(H) 93x (W) 6.5x (D) 23cm (BS D 9.5cm)
Material:
Glass and Metal
•
COLOURFUL AMBRE EFFECT MOON AND STAR
•
SOLAR POWERED
•
CREATES A REAL FOCAL POINT IN YOUR GARDEN BY ADDING COLOUR BY
DAY AND AT NIGHT WHEN IT AUTOMATICALLY ILLUMINATES
•
WITH A WARM WHITE LED INSIDE A CRACKLED GLASS BALL
•
1 x AAA 1.2V NI-MH 300MAH Battery (not replaceable)
