JCG JHR-N916R, User Manual

Page: 30 / 79

www.jcgcom.com 29
Short Slot -- It is used for shortening the communication time between AP and clients.
Tx Burst -- AP attempts to send multiple packets when receiving ACK response from
the client. It allows AP to maintain a larger throughput in the same time and network
environment.
Package Aggregate -- It could reduce network bandwidth seized by control to assemble
multiple small data packages into a large data package for transmission; however, it may
reduce network performance in an environment with unstable traffic or serious interference.
WMM -- It is used for improving the data transmission performance of wireless network for
multimedia contents. WMM function only works after activation.
A PSD -- Automatic power-saving transmission mode. It allows to save electric energy if
there is no data transmission. It may reduce wireless performance after activation.
3. Security Settings
The security mode and encryption type etc. of wireless network could be set here to
prevent clients from accessing your wireless network without permission.
Note:
When key length is 64, please enter 10 hexadecimal characters or 5 ASCII characters;
when key length is 128, please enter 26 hexadecimal characters or 13 ASCII characters.
This router is provided with wireless network password in factory default. Please refer to the
label on the back of the case for details.