![background image](http://html2.mh-extra.com/html/jcb/xr-series/xr-series_owners-manual_3596359015.webp)
OPERATION
10
10
Digging Chain Setup
It is recommended that the digging chain is set up as
shown in illustration
A
. That is in a ‘V’ configuration with the
single tooth
1
in the centre and leading point of the ‘V’. The
‘V’ is formed by using progressively wider spacers
2
and
teeth
1
, so that as the chain
3
rotates the cut becomes
wider. Refer to
Trench Widths and Depths
for width and
depth limits.
Trench Widths and Depths
Refer to
Specifications
on page 22.
Note: Optional
Trencher Chain Kits and Trencher Cleaners
are available (see
Specification
at the end of this section).
A1461-1
0881
A
2
2
1
1
3
Summary of Contents for XR Series
