63
transfers heat from inside the unit to the cooler air outside.
Exposure to Radio Frequency Energy
JCB Toughphone
contains radio transmitters and receivers. When on, JCB
Toughphone receives and sends out radio frequency (RF)
energy through its antennas. The JCB Toughphone cellular
antenna is located at the bottom edge of JCB Toughphone,
to the left of the Home button. The Wi-Fi and Bluetooth®
antenna is located at the top edge of JCB Toughphone, to
the right of the headset jack.
For optimal mobile device performance and to be sure that
human exposure to RF energy does not exceed the FCC, IC,
and European Union guidelines, always follow these
instructions and precautions: When on a call using the
built-in audio receiver in JCB Toughphone, hold JCB
Toughphone with the dock connector pointed down toward
your shoulder to increase separation from the antenna.
When using JCB Toughphone near your body for voice calls
or for wireless data transmission over a cellular network,
keep JCB Toughphone at least 15 mm (5/8 inch) away from
the body, and only use carrying cases, belt clips, or holders
that do not have metal parts and that maintain at least 15
mm (5/8 inch) separation between JCB Toughphone and the
body.
JCB Toughphone is designed and manufactured to comply
with the limits for exposure to RF energy set by the Federal
Communications Commission (FCC) of the United States,
Industry Canada (IC) of Canada, and regulating entities of
Japan, the European Union, and other countries. The