ammonia, or abrasives to clean JCB Toughphone. The front screen surfaces
have an oleophobic coating. To remove fingerprints, simply wipe these
surfaces with a soft, lint-free cloth. The ability of this coating to repel oil will
diminish over time with normal usage, and rubbing the screen with an abrasive
material will further diminish its effect and may scratch the glass.
Dust and Water
The JCB Toughphone in fully tested to meet either IP54 or
IP57 specifications (depending on the model). It is very important to note that
all of the Toughphone connectors, covers and battery compartment must be
correctly fastened and have the correct 0-rings fitted to meet the waterproof
and dust specifications Failure to ensure all connector, covers, battery
compartment and O rings are correctly fitted will invalidate the warranty. In
case JCB Toughphone gets wet turn off JCB Toughphone before cleaning, and
allow it to dry thoroughly before turning it on again. Do not attempt to dry JCB
Toughphone with an external heat source, such as a microwave oven or hair
dryer.
Repairing or Modifying JCB Toughphone
Never attempt to repair or modify
JCB Toughphone yourself. JCB Toughphone does not contain any
user-serviceable parts, except for the SIM card , Battery and Battery
Compartment. Disassembling JCB Toughphone, including the removal of
external screws and back cover, may cause damage that is not covered under
the warranty. Service should only be provided by a JCB Authorized Service
Provider. If you have questions, a JCB Toughphone Authorized Service
Provider.
Charging JCB Toughphone
To charge JCB Toughphone, only use the JCB
Toughphone Connector to USB Cable or a high-power USB port on another
device that is compliant with the USB 2.0 or 1.1 standard, or another JCB
Toughphone -branded product or accessory designed to work with JCB
Toughphone, or a third-party accessory certified to use with JCB Toughphone.
Read all safety instructions for any products and accessories before using with
JCB Toughphone. JCB Toughphone is not responsible for the operation of, or
any damage caused by, third-party accessories or their compliance with safety
and regulatory standards.
When you use the JCB Toughphone USB Power Adapter to charge JCB
Toughphone, make sure that the power adapter is fully assembled before you
plug it into a power outlet. Then insert the JCB Toughphone USB Power
Adapter firmly into the power outlet. Do not connect or disconnect the JCB
Toughphone USB Power Adapter with wet hands.
The JCB Toughphone USB Power Adapter may become warm during normal
use. Always allow adequate ventilation around the JCB Toughphone USB
Power Adapter and use care when handling. Unplug the JCB Toughphone
USB Power Adapter if any of the following conditions exist:
