JCB-SH140D
Instruction & User Manual
22
Operation - Starting
1.
Remove fuel cap and fill the tank with fuel until the gauge reads “F”.
2.
Secure fuel cap back into place.
3.
Plug power cord into a suitable power source, make sure the power sources switch is in the off position
before inserting power cord.
4.
Turn the Thermostat control knob to the desired temperature.
5.
Press the Power Switch into the "On" position. The Power LED and Temperature screens will now be
activated .
Power LED
Thermostat Knob
Operation - Stopping
1.
Simply turn the power switch to “OFF” position and unplug
2.
the power cord.
Operation- Restarting
1.
Wait ten seconds after shutting off the heater.
2.
Turn the power switch to “ON” position.
3.
Be sure to follow all starting procedure precautions.
Power Switch
Room Temp'
Set Temp'