JCB-SH140D
Instruction & User Manual
19
Fuel Tank Flange
Wheel Axle
Wheel
Cotter Pin
Washer
Wheel Cover
Assembly
Tools required: Medium cross head screw driver, 5/16"open end or adjustable
wrench,needle nose pliers
Nuts (A)
Rear Handle
1. Align the holes of Front Wheel Mounts with the holes on the Fuel Tank Flange. Secure with the 4 x Nuts (A).
Ensure the lower axle holes are facing toward the front of the machine
2. Repeat for the Rear Mounts, ensure the holes for the Rear Handle are facing the rear of the machine.
3. Repeat on both sides of the machine.
4. Secure the Rear Handle to the Rear Mounts using the Nuts (B)
5. Slide the Wheel Axle through the lower holes on the Front Wheel Mounts.
6. Place a wheel, followed by a washer. Secure this into place using the Cotter Pins. Simply insert the
cotter pin through the hole in the axle, until holds into place.
7. Repeat on both sides and secure the Wheel Covers