RELEASING THE CUTTING HEAD
The Cutting Head will automatically
rise to the upper position once it
is released from the locked down
position.
It will automatically lock in the upper
position.
To Release the Cutting Head from the
Locked Down position:
1) Gently press down on the Cutting
Handle.
2) Pull out the Cutting Head latching
pin (See ) and allow the Cutting
Head to rise to its upper position.
If Release is Difficult:
1) Gently rock the Cutting Head up
and down.
2) At the same time twist the Head
Latching Pin clockwise and pull
outwards.
NOTE: We recommend that when
the machine is not in use the Cutting
Head is locked in its down position
with the latching pin fully engaged in
its socket.
15
