background image

9

JCB-IT30, JCB-IT50
Instruction Manual

GUARANTEE

This product is guaranteed against manufacturing defects for a period of 3 years from the 
date of purchase. 
Repair or replacement of products will be undertaken providing that: 
•  The product has been subject to fair wear and tear only
•  The product has not been subject to accidental or cosmetic damage
•  The product has not been misused and has been used only in accordance with the 

instruction manual provided

•  The product has not been subject to insufficient servicing and maintenance
•  The product has not been subject to any abnormal environmental conditions or 

inappropriate operating conditions

•  Repairs have not been attempted by an unauthorised person and no modifications 

have been made to the product

The guarantee excludes the following (where relevant): 
•  Components normally subject to wear and tear
•  Batteries and chargers

Your statutory rights are not affected. 

We reserve the right to alter specifications without prior notice. 
 

WE WILL NOT BE LIABLE FOR ANY INJURIES OR CONSEQUENTIAL 
DAMAGES RESULTING FROM THE USE OF THIS PRODUCT

Summary of Contents for JCB-IT30













Reviews: