background image

15

JCB-20MT
Instruction & User Manual

Connecting the battery to the 
power tool

 

m

Connect the battery to the battery socket 
on the power tool so that it clicks into place.

Removing the battery from the 
power tool

 

m

Press the battery release button and remove 
the battery from the power tool.

Replacing Accessories

 

m

Place the power tool on a stable surface, for 
example a work bench.

 

m

Turn the accessory lock forward 180 
degrees to release the accessory and the 
accessory adaptor.

 

m

Select the appropriate accessory for the job. 
Align the mounting holes on the accessory 
over the pins on the multi-function head.

 

m

Hold the accessory adaptor and accessory 
against the multi-function head. Release the 
accessory lock.

Selecting Sandpaper

Work with moderate pressure on the power 
tool when sanding, otherwise it is easy to 
mark the workpiece.

NOTE

There is a number on the back of the 
sandpaper. The higher the number, the smaller 
the grit, and the lower the number, the larger 
the grit. 

 

m

Large grit remove more material and 
are suitable for removing paint or rough 
sanding of raw surfaces with burrs and 
nicks etc. The sanded surface will be 
relatively rough.

 

m

Sandpaper with medium grit is often 
suitable for sanding more simple wooden 
structures and carpentry.

 

m

Sandpaper with fine grit is suitable for 
sanding untreated wood when a soft and 
smooth surface is required.

 

m

Sandpaper with extra fine grit is suitable for 
fine sanding and polishing, or for sanding 
between coats of varnish.

Fitting and Replacing Sandpaper

 

m

Align the sandpaper to the Velcro fastener 
on the sanding pad, and press in place.

 

m

When replacing or adjusting the position of 
the sandpaper, pull the sandpaper carefully 
off from one of the corners.

Sanding

Sanding dust hazardous to health is produced 
from both wood and metal. Wear a dust 
filter mask and safety glasses.

WARNING!

Always test sand a sample piece first.

NOTE

 

m

Hold the sanding pad just over the 
workpiece, without the sandpaper 
touching the workpiece. Start the multi-
tool and move the power switch to 
position 1, and wait until the tool has 
reached full power.

 

m

Bring the power tool down flush with the 
workpiece, so that all the sanding surface is 
in contact with the workpiece.

Summary of Contents for JCB-20MT























Reviews: