![background image](http://html.mh-extra.com/html/jcb/jcb-20blms/jcb-20blms_original-instructions-manual_3566528020.webp)
20
JCB-20BLMS
Instruction & User Manual
Assembly and Operation
Prior to any assembly and adjustment always
disconnect the tool from the power supply.
WARNING!
Assembling the saw (Fig1/2/3/4)
m
In order to adjust the turn table (14) loosen
the locking handle (11) approx. 2 turns and
lift up the release lever (29).
m
Turn the turn table (14) to the desired angle
measurement on the scale indicator (12) and
secure with the locking handle (11), as shown
in Figure 1.
m
Pressing the machine head (4) lightly
downwards and removing the fastening bolt
(23) from the motor bracket at the same
time disengages the saw from the lowest
position, as shown in Figure 2.
m
It is possible to tilt the machine head (4) a
max. 45° to the left by loosening the locking
screw (22).
m
Swing the machine head (4) up.
m
It is possible to secure the clamping device
(7) to the left or right on the fixed saw table
(15). Insert the clamping device (7) in the
hole on the rear side of the stop fence (16)
and secure it with the grip screw (7a), as
shown in Figure 3.
m
Attach the workpiece supports (8) to the
fixed saw table (15) as shown in Figure 4
and fasten with the screw (9).
Checking and adjustment of perpendicular
position of cutting fence (16)
m
Ensure the turntable is set to 0° on the mitre
scale and the machine head (4) is locked in
the down position.
Fig.3
15
Fig.1
Fig.4
9
12
11
22
14
16
7
13
23
4
7a
Fig.5
Fig.6
22
27
20
18
19
14
28
Fig.7
3
35
2
8
Fig.2
29