14
Please consult your manual for full information or consult your local dealer.
Control panel – DSE 7310
Fig 7
This button places the module into its STOP/RESET mode. This will clear any alarm
conditions for which the triggering criteria have been removed. If the engine is running
and the module is put into STOP/RESET mode, the module will automatically instruct the
generator to unload (‘Close Generator output’ becomes inactive. In STOP/RESET mode
the generator remains at rest.
This button places the module into its MANUAL mode. Once in MANUAL mode, the
module responds to the start button to start the generator and run it off load. The MCCB
need to be closed manually.
A
Module display
B
Four configurable status LED (Light
Emitting Diode)
C
Transfer to generator - manual
mode only (not used)
D
Generator available LED
E
Start button
F
Alarm mute and lamp test
G
Generator breaker LED (not used)
H
Auto mode
J
Test mode (not used)
K
Mains breaker LED (not used)
L
Manual mode
M
Stop/reset button
N
Selected mode indication LED
P
Mains available LED (not used)
Q
Transfer to mains – manual mode
only (not used)
R
Module display navigation button
A
B
C
E
F
H
L
M
N
R
J
Q
K
G
D
P
