jcb G20, Operator'S Manual

Page: 41 / 177

Operation
Instruments
34 9831/0650-3 34
Mode Icon
An icon is displayed in the Mode Icon section to indicate the mode the controller is currently in.
Table 7.
Icons Description
Appears when the engine is at rest and the unit is in
stop mode.
Appears when the engine is at rest and the unit is in
auto mode.
Appears when the engine is at rest and the unit is
waiting for a manual start.
Appears when a timer is active, for example cranking
time, crank rest etc.
Appears when the engine is running, and all timers
have expired, either on or off load. The animation
speed is reduced when running in idle mode.
Appears when the unit is in the front panel editor.
Appears when a USB (Universal Serial Bus) connec-
tion is made to the controller.
Appears if either the configuration file or engine file
becomes corrupted.
Load Switching Icon
Additional features for optional DSE4520 mains failure controller.
Icons are displayed in the Load Switching Icon section to indicate the current operation status of the controller.
Table 8.
Icons Description
Appears when the generator is at rest or not available and when the generator
breaker is open.
Appears when the generator is at rest or not available and the generator breaker
has failed to open.
Appears when the generator is available and the generator breaker is open.
Appears when the generator is available and the generator breaker is closed.
Appears when the mains supply is not available and the mains breaker is open.
Appears when the mains supply is not available and the mains breaker is closed.