jcb G20, Operator'S Manual

Page: 177 / 177

Technical Data
Warranty Information
170 9831/0650-3 170
Warranty Information
General
The machine must be maintained in accordance with the regular maintenance requirements detailed in this
handbook. Only suitable trained personal should carry out the regular servicing.
Only Genuine JCB parts, or parts of equivalent quality should be used.
Installation Access
Your JCB Generator will need to be made available for scheduled and unscheduled maintenance work. Units
should always be sited to enable reasonable unrestricted access for regular maintenance and repair work.
Significant extra costs incurred for gaining access to a generator due to the installation are the responsibility
of the customer and will not be covered by warranty.
Downtime Support
If you require a substitute power source during maintenance or repair then alternative power generation must
be arranged. JCB do not provide replacement units under warranty, however your JCB dealer may be able to
assist in sourcing a substitute generator during any periods of work.
Terms and Conditions
The following warranty terms and conditions are applicable, for further details please contact your JCB dealer:
• – 18 months from date of despatch from JCB or 12 months from first date in service (whichever is earlier).
• – Cross-hire, consequential damage and third party losses are not warrantable.
• – Extended warranty is available for up to 2 years from first date in service, contracts and conditions
applicable and administered by JCB Service.
Emergency Standby Power (ESP)
Warranty is 18 months from date of despatch or 12 months from date of commissioning or whichever comes
earlier. The unit should not be expected to run more than 200 hours per year.
Prime Power (PRP)
Warranty is 18 months from date of despatch or 12 months from date of commissioning or whichever comes
earlier. The unit, operating on variable load, should have an average load not exceeding 75% of PRP rating
Continuous Power (COP) and Limited Time Running Power (LTP)
For machines to be used for such applications the application must first be approved by JCB and then a specific
warranty period will be advised.