6
EXTENDING CREvICE
TOOl
‚
This is useful for spot cleaning and hard to
reach places. To extend the crevice tool
‚
, pull
out the extending section. To retract, push the
button on the side and push the end back into
the tool body
D
.
UphOlSTERY NOZZlE
‡
& BRUSh ATTAChmENT
·
This is stored on the underside of the tank
E
.
The upholstery nozzle
‡
is useful for larger
areas of soft furnishings. Attach the brush
·
for use on hard surfaces
F
.
DRY vACUUm ClEANING
When picking up fine dust, the filter will clog
more quickly. Emptying the tank
fl
and
cleaning the filter (see Filter section) after every
use will help maintain full suction.
wET pICK-Up
When picking up liquids, do not fill beyond the
max fill line.
EmpTYING
To empty, lift the two tank catches
Á
on either
side of the motor housing
fi
and lift off the
top section of the cleaner from the tank
fl
G
.
Empty the tank
fl
. Rinse out any dirt and dry
fully before re-fitting the motor housing
fi
.
FIlTER
To maintain maximum suction, the filter must
be clean. Ideally, the filter should be cleaned
after every use, especially if fine dust is picked
up.
To clean, remove the filter from the filter cage
H
by stretching the elastic neck of the filter
off the filter cage. Wash the filter in cool clean
water (no detergent). Leave to air-dry before
refitting.
When refitting, make sure that the filter is
secured by making sure the elastic neck of the
filter is located over the circular rib of the filter
cage.
E
F
G
H
D
