7
opeRATIng The
ApplIAnCe
Combination floor nozzle
This nozzle
È
is suitable for general purpose
cleaning on a wide variety of floor coverings.
Using & cleaning the turbo nozzle
(certain models only)
The Turbo nozzle
Ó
is ideal for hair and fibre
pick-up, especially on deeper pile carpets.
After use, hair and fibres may become wrapped
around the brush, reducing the performance.
To remove, carefully cut the hair and fibres
with scissors before pulling away. If any large
particles are sucked into the turbo nozzle,
these may become caught in the turbo fan. To
access the turbo fan, remove the cover from
underneath the nozzle. Make certain the cover
is re-fitted before reusing the turbo nozzle.
Tool storage
The upholstery nozzle and the crevice tool are
stored in the internal storage compartment
› A
.
opeRATIon
Assembly
Snap the 360° rotating head on the suction hose
Ë
into the suction hose opening
¤
on the
vacuum cleaner
B
.
Fit the telescopic tube
Í
to the hose handle.
Press the release button to adjust the length of
the telescopic tube
C
.
Attach the desired nozzle to the bottom of the
telescopic tube. Alternatively, the nozzle can be
attached directly to the hose handle.
Switching on
Pull out the mains supply cable to its maximum
length. Plug the appliance into the mains supply.
Push the on/off foot switch
‰
to start the
motor
D
.
ConTRollIng sUCTIon
poweR
The Eco Switch
„
allows you to turn down the
power when cleaning more delicate items, such
as curtains and upholstery, saving energy and
reducing running costs
E
. See table 2 (page 6)
for guideline settings.
C
D
A
B
E