background image

Section 2 - Care and Safety

Safety Notices

Safety Check List

2 - 2

2 - 2

9803-9480-1

Safety Check List

Safety - Yours and Others

INT-1-3-1_3

All machinery can be hazardous. When a machine is 
correctly operated and properly maintained, it is a safe 
machine to work with. But when it is carelessly operated or 
poorly maintained it can become a danger to you (the 
operator) and others.

In this manual and on the machine you will find warning 
messages. Read and understand them. They tell you of 
potential hazards and how to avoid them. If you do not fully 
understand the warning messages, ask your employer or 
JCB distributor to explain them.

But safety is not just a matter of responding to the 
warnings. All the time you are working on or with the 
machine you must be thinking what hazards there might be 
and how to avoid them.

Do not work with the machine until you are sure that you 
can control it.

Do not start any job until you are sure that you and those 
around you will be safe.

If you are unsure of anything, about the machine or the job, 
ask someone who knows. Do not assume anything.

Remember

BE CAREFUL

BE ALERT

BE SAFE

General Safety

T1-007_3

!M

WARNING

Operator Manual

You and others can be injured if you operate or 
maintain the machine without first studying the 
Operator Manual. Read the safety instructions before 
operating the machine. If you do not understand 
anything, ask your employer or JCB dealer to explain 
it. Keep the Operator Manual clean and in good 
condition. Do not operate the machine without an 
Operator Manual in the cab, or if there is anything on 
the machine you do not understand.

INT-1-3-2_2

!M

WARNING

Care and Alertness

All the time you are working with or on the machine, 
take care and stay alert. Always be careful. Always be 
alert for hazards.

INT-1-3-5

!M

WARNING

Clothing

You can be injured if you do not wear the proper 
clothing. Loose clothing can get caught in the 
machinery. Wear protective clothing to suit the job. 
Examples of protective clothing are: a hard hat, safety 
shoes, safety glasses, a well fitting overall, ear-
protectors and industrial gloves. Keep cuffs fastened. 
Do not wear a necktie or scarf. Keep long hair 
restrained. Remove rings, watches and personal 
jewellery.

INT-1-3-6_2

!M

WARNING

Alcohol and Drugs

It is extremely dangerous to operate machinery when 
under the influence of alcohol or drugs. Do not 
consume alcoholic drinks or take drugs before or 
while operating the machine or attachments.  Be aware 
of medicines which can cause drowsiness.

INT-1-3-9_2

Summary of Contents for 354






















Reviews: