9
21-MS-ST
Instruction & User Manual
m
Fasten the tabletop machine with 4 coach
screws (D), 4 washers (E), 4 spring washers
(F) and 4 hexagonal nuts (G) on each of the
support arms.
m
Tighten the screws after assembly.
m
Fasten the support arms (B) with the
mounted tabletop machine on the mitre
saw stand, as described on page 8.
Fitting the workpiece supports (Fig. 6-7)
Insert the workpiece support (C) into the
support post (K) of the frame bed and fasten in
place with the star-grip screw (I).
Repeat the above for the other support.
The width and height of the workpiece
supports can be adjusted with the star-grip
screws (H, I). (Fig. 6)
Fastening your tabletop machine (Fig. 7)
Different tabletop machines can be fastened to
your mitre saw stand by adjusting the support
arms (B) to the spacing of the mounting holes
on your machine.
m
Place your tabletop machine (e.g. mitre
saw) on the support arms (B) (Fig. 7).
8
6
B
H
7
C
K
I
G
F
E
D
2825 21-MS-ST Mitre Saw Stand Manual.indd 9
2825 21-MS-ST Mitre Saw Stand Manual.indd 9
28/06/2021 10:47
28/06/2021 10:47