8
21-MS-ST
Instruction & User Manual
The mitre saw stand is largely assembled and
you need only fit the support arms and the
crossbars as follows:
Erecting the mitre saw stand
(Fig. 3-4)
Place the mitre saw stand (A) on the floor or
on a workbench such that the frame legs (A.1)
are uppermost.
Press the spring pins (J) and fold out the frame
legs.
Once the spring pin latches into the intended
position, the frame leg is locked.
Rotate the mitre saw stand and set down on
its feet.
Mounting support arms (Fig. 5)
Fit the support arms (B) to the frame bed (A)
by pulling the locking lever (B.3) upwards to
unlock it and then latching the arm into place
on the frame base, firstly on the front side
(B.2).
Lower the rear side onto the bed and fasten
the support arm in place on the frame bed by
pressing the locking lever (B.3).
Disassembly is performed in reverse order.
ASSEMBLY AND OPERATION
A.1
3
4
M
A
B.2
B.3
B.1
B
A
5
J
2825 21-MS-ST Mitre Saw Stand Manual.indd 8
2825 21-MS-ST Mitre Saw Stand Manual.indd 8
28/06/2021 10:47
28/06/2021 10:47
