35
FNS-0012-060-EN June 2019 Rev A
Troubleshooting (continued)
•
Juicer will not start
1. Juicer is not plugged into electrical outlet.
2. Building circuit breaker or GFI has tripped (reset).
3. Covers are not completely closed.
Open and close both doors, make sure the sensors are securely fastened and then ensure the
doors are firmly closed.
•
Juicer starts, but shuts off
1. Juicer is tripping GFCI outlet
Certain GFCI outlets will not support the juicer. Have electrician replace with a compatible outlet.
2. Building circuit breaker is not properly rated for 15 Amps.
3. Extension cord or wiring is too long.
Shorten extension cord or use heavier gauge wire. (See Page 6 "Electrical Specifications")
4. All covers not completely closed (including cart).
Juicer may be flexing when squeezing fruit, causing switch to open. Make sure all latches are
completely locked.
•
Safety Circuit Fault screen will not go away
1. Call Service Provider
Summary of Contents for Fresh'n Squeeze 2nd Generation Multi-Fruit Juicer
