7
JBL Professional
Figure 5
Figure 4
5. Wrap the opposite end of the open jacket around the riser ring as
shown in
Figure 4
. Be certain that the bottom of the protective
jacket is tucked-in all the way around the riser ring as shown.
6. “Zip” up the Velcro strip and pull the draw cord closed as
required as shown in
Figure 5
. The protective jacket should now
be securely fastened all the way around the riser ring at the
bottom and top end of the jacket and should be closed securely
forming a protective closure around the connector panel.
7. Repeat the process for the other connector panel.
www.audiovias.com
