17
JBL Professional
DP2 AC Power Ratings
Description
10VAC
0VAC
Idle (Sleep Mode)
< 0W
Quiescent Power Draw
< 75W
1/8th Power, Pink Noise (UL/CSA)
00W, A rms
00W, A rms
1/rd Power, Pink Noise
8 A
.6 A
Maximum Power Draw
950W
Inrush Current
Inrush current limiting via PTC soft-start
AC Power Module Connectors: 1A Max, 100-10VAC/0-0VAC, 50-60 Hz. Class 1
Wiring
16 AWG
(1.5 mm
)
Inlet Connector Rating
A
A
Outlet Connector Rating
8A
9A
DP1 AC Power Ratings
Description
10VAC
0VAC
Idle (Sleep Mode)
< 10W
Quiescent Power Draw
< 60W
1/8th Power, Pink Noise (UL/CSA)
600W, 5A rms
600W, .A rms
1/rd Power, Pink Noise
9 A
6 A
Maximum Power Draw
500W
Inrush Current
Inrush current limiting via PTC soft-start
AC Power Module Connectors: 1A Max, 100-10VAC/0-0VAC, 50-60 Hz. Class 1
Wiring
16 AWG
(1.5 mm
)
Inlet Connector Rating
5A
.A
Outlet Connector Rating
7A
8.8A
Line Voltage Selection:
The DrivePack® features an international Auto-Sensing power supply and will
automatically select the correct operating voltage range window. Automatic voltage selection is between
100-10VAC and 00-0VAC operation, 50/60Hz.
Line Voltage Tolerance:
The amp will operate normally (with expected de-rating in power output during low
line conditions) over a range of 100-10VAC +/-10% or 00-0VAC +/-10% AC input voltage. The amp will
shut down for voltages below nominal line and self protect for over-voltage beyond 15% nominal line.
CAUTION:
Continuous voltages 10% beyond high line at either 10VAC or 0VAC operation
ranges can disrupt performance of the JBL DRIVEPACK! To avoid activation of amplifier low line/
high line protection which will interrupt audio performance, the system operator should maintain
AC supply voltages within the rated voltage windows.
www.audiovias.com
