![background image](http://html.mh-extra.com/html/jbl/simply-cinema-sub350/simply-cinema-sub350_preliminary-service-manual_639698013.webp)
– 16 –
For proper Dolby Pro Logic
operation, a test tone
is used to calibrate the
volume settings of the
speakers. A noise will be
heard cycling, in order,
from the front left, center,
right, and both surround
speakers.
Using the remote control,
push “Tone.” Then adjust
the Center and Surround
levels until the volume
of all the speakers is the
same during the test.
Note:
The test tone is
used to calibrate the
performance of the system.
When listening to an actual
recording, the volume level
of the surround channels is
generally much lower than
that of the front channels.
In fact, when listening to a
movie, virtually all of the
dialogue and a substantial
number of the effects are
reproduced through the
center channel.
Test Tone
Balance
Surround
Calibrate
+
–
Surround
Calibrate
+
–
Surround
Calibrate
+
–
Center-Channel Volume
Surround
Calibrate
+
–
Surround
Calibrate
+
–
Surround
Calibrate
+
–
Aux
Surround
Tone
Calibrate
+
–
REMOTE
Push “Calibrate” on the
remote control until
“Balance” appears in the
display.
REMOTE
Push “–” on the remote
control to adjust the
balance toward the left
speaker.
REMOTE
Push “+” on the remote
control to adjust the balance
toward the right speaker.
REMOTE
Push “Calibrate” on the
remote control until “Center”
appears in the display and
the corresponding LED on
top of the display is lit.
REMOTE
Push “–” on the remote
control to decrease the
volume of the center channel.
REMOTE
Push “+” on the remote
control to increase the
volume of the center
channel.
THE SOURCE
CD
Open
Random
Power
Volume
Skip
Search
Tune
Stereo/Mono
– Bass +
Surround Mode
– Treble +
Tuner Presets
Auto Add
Tape/Aux
TV
Auto Tune
AM/FM
Repeat
Delete
Rear
Speakers
TM
Mute
Volume
CD
AM/FM
TV
Aux
Surround
Tone
Calibrate
Power
Sleep
+
–
+
–
The Source
Remote Control
Rear-Channel Volume
Surround
Calibrate
+
–
Surround
Calibrate
+
–
Surround
Calibrate
+
–
REMOTE
Push “Calibrate” on the
remote control until “Rear”
appears in the display and
the corresponding LED on
top of the display is lit.
REMOTE
Push “–” on the remote
control to decrease the
volume of the rear channels.
REMOTE
Push “+” on the remote
control to increase
the volume of the rear
channels.
ESC350 Simply Cinema OM 9/11/98 2:06 PM Page 16
12