JBL SCS SAT 300 Owner'S Manual Download Page 8

Declaration of Conformity

We, Harman Consumer Group International

2, route de Tours
72500 Chateau-du-Loir
France

declare in own responsibility that the products described in this
owner’s manual are in compliance with technical standards:

EN 61000-6-3:2001
EN 61000-6-1:2001

Gary Mardell

Harman Consumer Group International

Chateau-du-Loir, France 04/04

Maximum Recommended Amplifier Power 

100 Watts 

Power Handling (Continuous/Peak) 

50W/200W

Nominal Impedance 

8 Ohms 

Sensitivity

88dB @ 1 Watt/1 meter

Frequency Response 

100Hz – 20kHz (–6dB)

Tweeter

One 13mm (1/2") titanium-laminate dome, video-shielded

Midrange 

Dual 75mm (3") drivers, video-shielded

Dimensions (H x W x D) (not including shelf stand)

292mm x 102mm x 89mm (11-1/2" x 4" x 3-1/2") 

Weight

1.4kg (3 lb)

SPECIFICATIONS 

All features and specifications are subject to change 
without notice.

*Trademarks of Dolby Laboratories.

DTS is a registered trademark of Digital Theater Systems, Inc.

DESIGN GOAL:

Bring the thrill of live performance 

and movie sound to the home environment by calling on JBL’s 
professional engineering leadership.

SATELLITE TYPE:

Titanium-laminate-dome tweeter,

sealed enclosure

PROFESSIONAL REFERENCE:

Cinema 

Loudspeaker Series

OWNER’S GUIDE

PRODUCT LINE:

MODEL:

SCSSAT300

SURROUND CINEMA
SPEAKERS

© 2004 Harman International Industries, Incorporated 

JBL is a registered trademark of 
Harman International Industries, Incorporated.

Part No.406-000-00957

PRO SOUND 
COMES HOME

JBL Consumer Products
250 Crossways Park Drive, Woodbury, NY 11797
8500 Balboa Boulevard, Northridge, CA 91329
516.255.4JBL (4525)  
www.jbl.com

Summary of Contents for SCS SAT 300









Reviews: