6
Connect each speaker to
the corresponding speaker
terminals on your receiver
or amplifier.
If you are using a subwoofer,
follow the directions in that
owner’s guide to connect and
configure it.
Configure your receiver or
processor to reflect the cor-
rect number of speakers in
your system. If you have
added one SCSSAT300
speaker to a 5.1-channel sys-
tem, reconfigure it as
a 6.1 system. If you have
added two SCSSAT300
speakers to a 5.1-channel
system, reconfigure it as
a 7.1 system.
The front left, front right, cen-
ter and rear speakers should
all be set to “Small.” If your
receiver allows you to set the
crossover frequency
between the subwoofer and
the main speakers, select
100Hz or the setting that is the
closest frequency below it.
SYSTEM CONNECTION
– +
– +
– +
– +
– +
– +
– +
– +
– +
Receiver
Subwoofer
Out
Left
Front
Left
Surround
– +
Right
Front
Right
Surround
Subwoofer
Center
Surround Back
Left
– +
Surround Back
Right
LFE In
Right Surround
Right Front
Left Surround
Left Front
Center
– +
Surround Back
Left
– +
– +
Surround Back
Right
