background image

9

Of those who have sought perfection in sound reproduction, only a 
few have actually come close. For one thing, it is a costly process. 
It is rare indeed when an individual or group is able to triumph over 
the constraints of economic and technological realities even once.

At JBL, this has happened nine times. In each case, our engineers 
were told to build the speaker system they had always wanted 
to build. Whatever resources were required would be made 
available. Thus began an ongoing search for new frontiers in 
sound reproduction, beginning in the mid-1950s and continuing 
to the present day.

The products that have resulted from this venture are now known 
as the JBL Project loudspeakers. Each represents the absolute 
peak of every technological, material and engineering innovation 
available at the time, combined into a single loudspeaker 
system.  They  are  Hartsfield,  Paragon,  Everest  DD55000,  K2 
S9500/7500, K2 S5500, K2 S9800, K2 S5800, Project Everest 
DD66000 and K2 S9900.

Although differing in performance details and physical attributes, 
all of the Project loudspeakers have shared a common objective 
–  to  elevate  sound  reproduction  to  levels  defined  only  by  the 
limitations of existing materials and technology. The fact that all 
Project loudspeakers have many common features, despite 
their having been created over a span of nearly sixty years, is a 
testimony to the excellence of the technology and manufacturing 
techniques upon which JBL was built.

defininG the Project concePt

The Hartsfield began a tradition at JBL that continues today. First, 
engineer a product as close to perfection as possible. When it 
reaches that level, make it better.

In 1954, the Hartsfield was significant in that it represented not new 
technology, but rather a new level of technical manufacturing, in the 
spirit of the approach pioneered by James B. Lansing some twenty 
years before. Like its Project series successors, it was a high-
efficiency system incorporating compression driver technology and 
combining the qualities of high-output, low-distortion, exceptional 
stereo imaging and fatigue-free listening. Most important, it was 
the first loudspeaker system available to consumers to do all this.

JBL’s president in 1954, William Thomas, described the Hartsfield 
as the “speaker system we have always wanted to build [with] the 
finest components ever made available to serious listeners.”

 Legacy

the historicaL DeveLoPment of  

the jbL Project LouDsPeakers

1

JBL Hartsfield

Summary of Contents for Project Everest DD65000



























Reviews: