background image

iii

 Important
Safety Instructions

1.    Read these instructions.

2.    Keep these instructions.

3.    Heed all warnings.

4.    Follow all instructions.

5.    Do not use this apparatus near water.

6.    Clean only with dry cloth.

7.    Do not block any ventilation openings. Install in accor-

dance with manufacturer’s instructions.

8.    Do not install near any heat sources such as radiators, 

heat registers, stoves or other apparatus that produce 
heat.

9.    Do not defeat the safety purpose of the grounding type 

plug.  A polarized plug has two blades with one wider 
than the other. A grounding type plug with two blades 
and a third grounding prong. The wide blade or the third 
prong is provided for your safety. If the provided plug 
does not fi t into your outlet, consult an electrician for 
replacement of the obsolete outlet.

10.  Protect the power cord from being walked on or pinched 

particularly at plugs, convenience recepticle and the 
point where the power cord connects to the apparatus.

11.   Only use attachments/accessories specifi ed by the 

manufacturer.  

12.  Use only with the cart, stand, tripod bracket, or table 

specifi ed by the manufacturer, or sold with the apparatus. 
When a cart is used, use caution when moving the cart 
/apparatus combination to avoid injury from tip-over.

13.  Unplug this apparatus during lightning storms or when 

unused for long periods of time.

14.  Refer all servicing to qualifi ed service personnel. Servic-

ing is required when the apparatus has been damaged in 
any way, including: power-supply cord or plug is dam-
aged, liquid has been spilled or objects have fallen into 
the apparatus, the apparatus has been exposed to rain 
or moisture, does not operate normally, or has been 
dropped.

15.  The appliance coupler of the power supply cord is used 

as the ultimate disconnect device from the mains. The 
appliance coupler shall remain readily operable. 

16.  The apparatus shall be connected to mains socket outlet 

with a protective earthing connection.

Explanation of Graphic Symbols

The exclaimation point within an equilateral 
triangle is intended to alert the users to the 
presence of important operating and mainte-
nance (servicing) instructions in the literature 
accompanying the product.

The lightning fl ash with the arrowhead 
symbol, within an equilateral triangle, is to 
alert the user to the presence of insulated 
“dangerous voltage” within the products 
enclosure that may be of suffi cient magna-
tude to constitute a risk of electric shock to 
humans.

CAUTION: TO REDUCE THE RISK OF 

ELECTRONIC SHOCK - DO NOT REMOVE 

COVER. NO USER SERVICEABLE PARTS 

INSIDE. REFER SERVICING TO QUALI-

FIED PERSONNEL. DO NOT EXPOSE 

THIS APPARATUS TO RAIN OR MOIS-

TURE.

ATTENTION: POUR EVITER LES RIS-

QUES DE CHOC ELECTRIQUE, NE PAS 

ENLEVER LE COUVERCLE. AUCUN 

ENTRETIEN DE PIECES INTERIEURES 

PAR L’USAGER. CONFIER L’ENTRETIEN 

AU PERSONNEL QUALIFIE. AVIS: POUR 

EVITER LES RISQUES D’INCENDIE 

OU D’ELECTROCUTION, N’EXPOSEZ 

PAS CET ARTICLE A LA PLUIE OU A 

L’HUMIDITE.

WARNING:

 To reduce the risk of fi re or electrical shock, do not 

expose the apparatus to rain or moisture.

 The apparatus shall not be exposed to dripping or 

splashing and no objects fi lled with liquids, such as 
vases, shall be placed on the apparatus. As with any 
electronic product, use care not to spill liquids into any 
part of the system. Liquids can cause a failure and/or a 
fi re hazard.

Summary of Contents for LSR4328P





















































Reviews: