background image

50

Warranty Statement

Who Is Protected by This Warranty?

Your JBL Warranty protects the original owner and all subsequent owners so long as: A.) Your JBL product 
has been purchased in the Continental United States, Hawaii or Alaska.  (This Warranty does not apply 
to JBL products purchased elsewhere except for purchases through military outlets.  Other purchasers 
should contact the local JBL distributor for warranty information.); and B.)  The original dated bill of sale is 
presented whenever warranty service is required.  The JBL Limited Warranty on professional loudspeaker 
products (except for enclosures) remains in effect for fi ve years from the date of the fi rst consumer 
purchase.  JBL amplifi ers are warranted for three years from the date of original purchase.  Enclosures 
and all other JBL products are warranted for two years from the date of original purchase.

What does the JBL Warranty cover?

Except as specifi ed below, your JBL Warranty covers all defects in material and workmanship.  The 
following are not covered: Damage caused by accident, misuse, abuse, product modifi cation or neglect; 
damage occurring during shipment; damage resulting from failure to follow instructions contained in your 
Instruction Manual; damage resulting from the performance of repairs by someone not authorized by JBL; 
claims based upon any misrepresentations by the seller; any JBL product on which the serial number has 
been defaced, modifi ed or removed.

Who Pays for What?

JBL will pay all labor and material expenses for all repairs covered by this warranty.  Please be sure to 
save the original shipping cartons because a charge will be made if replacement cartons are requested.  
Payment of shipping charges is discussed in the next section of this warranty.

How to Obtain Warranty Performance?

If your JBL product ever needs service, write or telephone us at JBL Incorporated (Attn: Customer Service 
Department), 8500 Balboa Boulevard, PO.  Box 2200, Northridge, California 91329 (800/852-5776).  We 
may direct you to an authorized JBL Service Agency or ask you to send your unit to the factory for repair.  
Either way, you’ll need to present the original bill of sale to establish the date of purchase.

Please do not ship your JBL product to the factory without prior authorization.  If transportation of your 
JBL product presents any unusual diffi culties, please advise us and we may make special arrangements 
with you.  Otherwise, you are responsible for transporting your product for repair or arranging for its 
transportation and for payment of any initial shipping charges.  However, we will pay the return shipping 
charges if repairs are covered by the warranty.

Summary of Contents for LSR4312SP






























































Reviews: