background image

3

Important Safety Instructions

WARNING FOR YOUR PROTECTION

READ THE FOLLOWING:

KEEP THESE INSTRUCTIONS
HEED ALL WARNINGS
FOLLOW ALL INSTRUCTIONS
THE APPARATUS SHALL NOT BE EXPOSED TO DRIPPING 

OR SPLASHING LIQUID AND NO OBJECT FILLED WITH 

LIQUID, SUCH AS VASES, SHALL BE PLACED ON THE 

APPARATUS
CLEAN ONLY WITH A DRY CLOTH.
DO NOT BLOCK ANY OF THE VENTILATION OPENINGS. 

INSTALL IN ACCORDANCE WITH THE MANUFACTURER’S 

INSTRUCTIONS.
DO NOT INSTALL NEAR ANY HEAT SOURCES SUCH AS 

RADIATORS, HEAT REGISTERS, STOVES, OR OTHER APPA-

RATUS (INCLUDING AMPLIFIERS) THAT PRODUCE HEAT.
ONLY USE ATTACHMENTS/ACCESSORIES SPECIFIED BY 

THE MANUFACTURER.
UNPLUG THIS APPARATUS DURING LIGHTNING STORMS 

OR WHEN UNUSED FOR LONG PERIODS OF TIME.
Do not defeat the safety purpose of the polarized or ground-

ing-type plug.  A polarized plug has two blades with one 

wider than the other. A grounding type plug has two blades 

and a third grounding prong. The wide blade or third prong 

are provided for your safety. If the provided plug does not 

fit your outlet, consult an electrician for replacement of the 

obsolete outlet.
Protect the power cord from being walked on or pinched 

particularly at plugs, convenience receptacles, and the point 

where they exit from the apparatus.
Use only with the cart stand, tripod bracket, or 

table specified by the manufacture, or sold with the 

apparatus. When a cart is used, use caution when 

moving the cart/apparatus combination to avoid 

injury from tip-over.  
Refer all servicing to to qualified service personnel. Servic-

ing is required when the apparatus has been damaged in any 

way, such as power-supply cord or plug is damaged, liquid 

has been spilled or objects have fallen into the apparatus, 

the apparatus has been exposed to rain or moisture, does 

not operate normally, or has been dropped.
POWER ON/OFF SWITCH: For products provided with 

a power switch, the power switch DOES NOT break the 

connection from the mains.
MAINS DISCONNECT: The plug shall remain readily 

operable. For rack-mount or installation where plug is not 

accessible, an all-pole mains switch with a contact separa-

tion of at least 3 mm in each pole shall be incorporated into 

the electrical installation of the rack or building.
FOR UNITS EQUIPPED WITH EXTERNALLY ACCESSIBLE 

FUSE RECEPTACLE: Replace fuse with same type and rating 

only.
MULTIPLE-INPUT VOLTAGE: This equipment may require 

the use of a different line cord, attachment plug, or both, 

depending on the available power source at installation. 

Connect this equipment only to the power source indicated 

on the equipment rear panel. To reduce the risk of fire or 

electric shock, refer servicing to qualified service personnel 

or equivalent.
If connected to 240V supply, a suitable CSA/UL certified power 

cord shall be used for this supply.

SAFETY INSTRUCTIONS 

NOTICE FOR CUSTOMERS IF YOUR UNIT IS 

EQUIPPED WITH A POWER CORD.
WARNING: THIS APPLIANCE SHALL BE CONNECTED 

TO A MAINS SOCKET OUTLET WITH A PROTECTIVE 

EARTHING CONNECTION.
The cores in the mains lead are coloured in accordance 

with the following code:
GREEN & YELLOW - Earth     BLUE - Neutral     BROWN 

- Live
As colours of the cores in the mains lead of this appli-

ance may not correspond with the coloured markings 

identifying the terminals in your plug, proceed as 

follows:
•  The core which is coloured green and yellow must be 

connected to the terminal in the plug marked with the 

letter E, or with the earth symbol, or coloured green, 

or green and yellow.

•  The core which is coloured blue must be connected to 

the terminal marked N or coloured black.

•  The core which is coloured brown must be connected 

to the terminal marked L or coloured red.

This equipment may require the use of a different 

line cord, attachment plug, or both, depending on the 

available power source at installation.  If the attachment 

plug needs to be changed, refer servicing to qualified 

service personnel who should refer to the table below. 

The green/yellow wire shall be connected directly to the 

units chassis.

CONDUCTOR

WIRE COLOUR

Normal

Alt

L

LIVE

BROWN

BLACK

N

NEUTRAL

BLUE

WHITE

E

EARTH GND

GREEN/YEL

GREEN

WARNING: If the ground is defeated, certain fault 

conditions in the unit or in the system to which it 

is connected can result in full line voltage between 

chassis and earth ground. Severe injury or death can 

then result if the chassis and earth ground are touched 

simultaneously.

The symbols shown above are internationally accepted 

symbols that warn of potential hazards with electrical 

products. The lightning flash with arrowpoint in an 

equilateral triangle means that there are dangerous 

voltages present within the unit. The exclamation point 

in an equilateral triangle indicates that it is necessary 

for the user to refer to the owner’s manual.
These symbols warn that there are no user serviceable 

parts inside the unit. Do not open the unit. Do not at-

tempt to service the unit yourself. Refer all servicing 

to qualified personnel. Opening the chassis for any 

reason will void the manufacturer’s warranty. Do not 

get the unit wet. If liquid is spilled on the unit, shut 

it off immediately and take it to a dealer for service. 

Disconnect the unit during storms to prevent damage.

Summary of Contents for KX180

















Reviews: