U
SING
Y
OUR
B
RIGHT
L
IGHT
L
AMP
M
ODULE
I
NSTRUCTION
S
HEET
BrightLight Module:
Now you can project your slides at a greater
distance and in rooms where there is too much
ambient light. Increase the brightness of your
existing Kodak Extagraphic III Slide Projector
50-70% by using a Navitar BrightLight Module.
Specially designed to slide in as a direct re-
placement for your current lamp assembly. No
modification to your slide projector required!
You can even use it in a multimedia presenta-
tion utilizing the dissolve feature. Now you
can project your slides at greater distances and
in rooms where there is too much ambient
light. Your slides will be brighter, more de-
fined, and their colors more vivid than ever
before.
Models Available:
Model EXW-J:
Designed for the multimedia presentations
where each slide will be shown for a short
period of time, typically a few seconds. This
model provides maximum slide brightness and
contrast, making colors more vivid and visuals
stronger.
Model EXW-SJF:
Designed for speaker support applications
where each slide will be shown for several
minutes or longer. The Jewel Thermal Heat filter
is included in the system to protect your slides
from potential damage caused by extreme expo-
sure resulting from extending viewing of a
single slide. This model has all of the enhanced
image benefits of the Model EXW-J but the slide
gate temperature has been reduced with only a
slight sacrifice in total image brightness.
