JBL DVD600 II, Service Manual, Page: 30 / 63

TECH TIPS
Troubleshooting tips and solutions to common service problems
For models: DVD600II (from the Cinema ProPack 600II System) TIP# JBLTT2003-03
Subject: Opening Tray Without Power
In the event you receive a DVD600II without power, and you have a need to open the tray manually:
On the bottom panel there is a 1 3/8” opening* covered by a black square plastic dust cover. Carefully,
with a sharp tool, peel it away from the opening and remove it. By inserting your finger in the opening, you
can feel the edge of a gear. With your fingernail, it is an easy matter to rotate the gear in the proper
direction; the tray will start to extract from the unit. If the top cover has been removed, once the tray is in
motion, you can push the tray out further from the back of the tray.
Replace the dust cover after you are finished servicing the unit.
* (NOTE: there are two – the correct one is the one with a square shape, closer to the front of the unit –
Not the rectangular one)
30
DVD600II