JBL DVD600 II Service Manual Download Page 11

Page: 11 / 63

Status Button:

This button operates only

when the DVD600

has been selected. When a

disc is playing, pressing this button will display
the Status Banner, which contains information
about the disc and enables you to change the
functions.

M1 and M2 Macro Buttons/Open-

Close Button:

Press these buttons to store or

recall a “Macro”, which is a preprogrammed
sequence of commands stored in the remote.

When the DVD600

has been selected, the

Button

functions to open or close the disc

tray drawer. (

has no function.) If the

drawer is opened while a disc is still playing,
playback will continue and discs not in use
may be changed. If the drawer is opened while
the unit is stopped, the disc that was playing
will be presented at the front-center position
of the tray.

Main Input Selector:

Pressing this

button will perform two actions: 1) If the
DCR600

is not turned on, it will power up.

2) It will switch to the page for the DCR600

which will cause the remote to operate only
the receiver and the transport functions of
the DVD600

CD Input Selector:

Pressing this button

will perform three actions: 1) If the DCR600

not turned on, it will power up. 2) It will select
CD as the input source. 3) It will switch to the
page for the CD player whose codes have been
programmed into the remote, which will cause
the remote to operate only the CD player. Press
the

Main Button

to return the remote to

control of the DCR600

receiver.

Tape Input Selector:

Pressing this

button will perform three actions: 1) If the
DCR600

is not turned on, it will power up.

2) It will select TAPE as the input source.
3) It will switch to the page for the tape deck
whose codes have been programmed into the
remote, which will cause the remote to oper-
ate only the tape deck. Press the

Main Button

to return the remote to control of the

DCR600

receiver.

AM/FM Tuner:

Selects the receiver’s

tuner as the listening choice. Pressing this but-
ton when the tuner is already in use will select
between the AM and FM bands.

Video 1 Input Selector (VCR 1):

Press-

ing this button will perform three actions: 1) If
the DCR600

is not turned on, it will power up.

2) It will select VIDEO 1 as the input source. 3)
It will switch to the page for the video device
whose codes have been programmed into the

remote, which will cause the remote to oper-
ate only that video device. You may find it con-
venient to connect your VCR to the Video 1
input, since it is the only video source that also
features outputs for recording. Press the

Main

Button

to return the remote to control of

the DCR600

receiver.

Video 2 Input Selector (Cable or

Satellite):

Pressing this button will perform

three actions: 1) If the DCR600

is not turned

on, it will power up. 2) It will select Video 2 as
the input source. 3) It will switch to the page
for the video device whose codes have been
programmed into the remote, which will cause
the remote to operate only that device. You
may find it convenient to connect your cable
television box or satellite receiver to this input.
Press the

Main Button

to return the

remote to control of the DCR600

receiver.

Video 3 Input Selector (VCR 2):

Press-

ing this button will perform three actions: 1) If
the DCR600

is not turned on, it will power up.

2) It will select VIDEO 3 (the front panel input)
as the input source. 3) It will switch to the
page for the video device whose codes have
been programmed into the remote, which will
cause the remote to operate only that video
device. Since this input is located on the front
panel of the receiver, you may find it conven-
ient to temporarily connect a camcorder, video
game, or a second video cassette player to the
Video 3 input. Press the

Main Button

return the remote to control of the DCR600

receiver.

TV Input Selector:

Pressing this button

will perform three actions: 1) If the DCR600

not turned on, it will power up. 2) It will select
TV as the input source. 3) It will switch to the
page for the television whose codes have been
programmed into the remote, which will cause
the remote to operate only that device. You
may find it convenient to connect your televi-
sion to this input, particularly since it does not
have a video input associated with it, the
assumption being that the program signal orig-
inates at the TV, and that the TV is already dis-
playing the video portion of the signal. Press
the

Main Button

to return the remote to

control of the DCR600

receiver.

Sleep:

Places the DCR600

in the Sleep

Timer mode. After the time shown in the
display has elapsed, the DCR600

will auto-

matically go into Standby. Each press of this
button changes the time until turn-off in inter-
vals of 10 minutes, starting with a maximum
of 90 minutes.

This button is also used to change channels on
your TV when the TV is selected.

This button is also used during the “Auto Search”
procedure when programming the remote.

Test:

Begins the sequence used to

calibrate the speaker output levels.

When the CD input has been selected and a CD
recorder is in use, this button is used to select
among the analog and digital inputs to the CDR.

6CH (TV/VID):

Press to select the

6-Channel Direct Input

∞

as the input

source. When used with a compatibly pro-
grammed VCR, DVD, TV or Satellite receiver
that has a “TV/Video” function, pressing this
button will switch between the output of that
device and the external video input to that
device. Consult the owner’s manual for your
specific player or satellite receiver for the
details of how it implements this function.

Volume Up:

Use to raise the system

volume.

Surround Mode/Audio:

Begins the

process of changing the surround mode when
the DCR600

is selected. After the button has

been pressed, use the

⁄

Buttons

to select the desired surround mode.

When the DVD600

is selected, this button

allows you to select from the available audio
tracks (including audio surround modes) or lan-
guages on a DVD disc that is currently playing.
Press this button repeatedly until the desired
audio selection appears.

This button is also used to tune channels when
the TV is selected.

This button is also used during the “Auto
Search” procedure when programming the
remote.

All Off:

This feature of the JBL One-Click™

(patent pending) remote simultaneously sends
Power Off commands to all programmed
devices controlled by the remote.

All On:

This feature of the JBL One-Click

remote simultaneously sends Power On com-
mands to all programmed devices controlled by
the remote.

Volume Down:

Use to lower the system

volume.

Channel/Title/Guide: