6. To orient the JBL logo into the correct position, pull the JBL
logo slightly outward from the speaker grille and rotate. The
JBL logo is held in place by a spring. Peel the adhesive cover
off the mounting-bracket cover and attach to the top and bottom
of the mounting assembly.
HALF-ROUND WALL
MOUNTING
(Horizontal or Vertical Orientation)
1. Secure two corner/wall-mounting brackets together by using
two #10-32 x 1/2” screws provided, as shown. Attach the
mounting bracket to the wall.
When deciding upon a location for the JBL Control CRV
speaker, take care NOT to install the mounting bracket closer
than 3” (7.6 cm) (horizontal) and 8-1/2” (21.5 cm) (vertical) to
the ceiling. Any closer than the minimum measurements will
not allow the clearance needed to position and slide the JBL
Control CRV speaker into the mounting bracket.
Bracket
Cover
INSTALLATION
#10-32 x 1/2" Screws (2)
7
CAUTION: Installation must be
done by qualifi ed persons using
safe rigging standards
.
The installer is responsible for proper selection
and use of mounting hardware, to properly and
safely wall-mount the speakers.
3"Minimum
(horizontal mount)
distance from ceiling
8-1/2" Minimum
(vertical mount)
distance from ceiling
3” Minimum
distance from ceiling
(horiontal mount)
8-1/2” Minimum
distance from ceiling
(vertical mount)
