UNPACKING THE BRACKET AND CABLE KIT
Carefully unpack the bracket and cable assembly. If you
suspect damage from transit, report it immediately to your
dealer and/or delivery service. Keep the shipping carton and
packing materials for future use. Open the package and verify
the following contents:
Included:
ATTACHING POLE TO POLE-MOUNT BRACKET
For Larger-Diameter Drop Tubes
1. Run the appropriate wiring down through the drop tube. Slide
the drop tube through the pole-mount-bracket cap.
2A. Slide the pole-mount bracket up onto the drop tube,
aligning the pinholes on the bracket with those on the drop
tube.
INSTALLATION
Pole Bushing
(used for
smaller-diameter
drop tubes)
Pole-Mount-Bracket Cap
Clevis Pin
Cotter Pin
Pole-Mount Bracket
(4) #10-32 x 2" Screws
Pole-Mount-Bracket Cover
Cable Assembly
Pole-Mount-Bracket Cap
Drop Tube
Pole-Mount Bracket Cap
Drop Tube
Pole-Mount Bracket
Pinholes
CAUTION:
Installation must be
done by qualifi ed persons using safe
rigging standards
.
The installer is responsible for proper
selection and use of mounting hardware, to
properly and safely pole-mount the speakers.
11
