manualshive.com logo in svg

JBL AV2, User Manual

Share
Download
JBL AV2 User Manual Download Page 56

Setup

Harman Consumer Group, Inc.

3-30

SURROUND CONFIGURATION

Selecting the SETUP menu, SURROUND CONFIG option opens the Surround Configuration menu, which is used to customize the list of available
listening modes that can be applied to incoming signals. Each Mode Family has a subset of available listening modes that can be turned off. If the
listening mode is set to OFF, then the applicable listening modes in that family are not available for selection from the mode buttons. If the listening
mode is ON, then the applicable listening modes in that family are available for selection. 

These are not input-specific settings; if a Mode Family option is turned off, it is removed from the list of available listening modes for ALL inputs, and
regardless of the incoming data stream. Some modes, such as Dolby Digital, DTS and the Stereo modes in the PCM menus, cannot be excluded
from the mode selections.

Note: The Logic 7 Default parameter is the one exception in the Surround Configuration menu 

–

 this parameter has different functionality, as described on the

following page. 

DOLBY VIRTUAL: OFF

STEREO DOWN MIX: ON

DOLBY MULTI-CHANNEL

LOGIC 7: ON

HALL: ON

5/7 CH STEREO: ON

DTS-ES DISCRETE: ON

LOGIC 7: ON

SURROUND CONFIG

LOGIC 7 DEFAULT: ON
DOLBY MULTI-CHANNEL
DOLBY 2.0
DTS

PCM 44.1/48 kHz
PCM 96kHz

MAIN MENU
AUDIO CONTROLS
VIDEO STATUS

DISPLAY SETUP
SPEAKER/EQ SETUP

INPUT SETUP

SURROUND CONFIG

DOLBY CONFIG

MUTE LEVELS

POWER ON SETTINGS

SETUP

SETUP

DOLBY PLII: ON

DOLBY VIRTUAL: OFF

DOLBY 2.0

DOLBY PLIIx: ON

DTS 96/24: ON

DTS-ES MATRIX: ON

DTS

DTS NEO:6: ON

LOGIC 7: ON
STEREO DOWN MIX: ON

DOLBY VIRTUAL: OFF

LOGIC 7: ON

DOLBY PLIIx: ON

PCM 44.1/48 kHz

DOLBY PLII: ON

DTS NEO:6: ON

5/7 CH STEREO: ON

LOGIC 7: ON

DOLBY PLIIx: ON

PCM 96kHz

DOLBY PLII: ON

DTS NEO:6: ON

BASSQ*: NO
*CHECK MANUAL FIRST

Summary of Contents for AV2







































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands