23
GUIDELINES AND MANUFACTURER'S STATEMENT-ELECTROMAGNETIC EMISSION
Labeling explain for Electromagnetic compatibility
Note !
Warning !
NO.
Project
Cablelength
（
m
）
Whether or not shielded Remark
1
POWER CORD
1.3
NO
/
2
CHARGER OUTPUT LINE
1.1
NO
/
FDB05A electric scooter meets the electromagnetic compatibility requirements of
IEC60601 standards.
The user shall install and use according to the EMC information provided in the
attached documents.
The portable and mobile RF communication equipment may affect the performance of
electric wheelchair and avoid strong electromagnetic interference when using, such as
close to mobile phones, microwave ovens, etc.
The guide and the manufacturer's statement are detailed in the annex.
FDB05A electric scooter should not be used close to or stacked with other equipment.
If it must be used close to or stacked, it should be observed and verified that it can op-
erate normally under the configuration used.
In addition to the cables sold by FDB05A electric scooter manufacturers as spare
parts of internal components, the use of accessories and cables other than those
specified may result in increased emission or reduced immunity of FDB05A electric
scooter.
!
!
