JBF Environmental Technology
20
v)
Remove all mooring lines.
vi) Remove
pumps.
vii)
Wash down or decontaminate the DIP 500 unit and all associated parts.
viii)
Repack components into storage box.
C Lay-up of DIP 500
i)
Repack components into storage box.
ii)
Remove the debris rods.
iii)
Deflate the pontoons.
iv)
Repack storage box and place back in mouth of skimmer.
v)
Reinstall debris rods.
vi)
Reinstall the pumps.
vii)
Install upper pump compartment safety grate.
viii)
Cover DIP 500 with tarp.
D
TROUBLESHOOTING & REPAIR
D GENERAL
This section describes operating and maintenance procedures for the JBF DIP
500
Skimming System. The maintenance instructions specific to the DIP System are
described and reference is made to the manufacturer's manuals.
The VOSS system contains the moving plane assembly, belt drive motor, and oil
transfer pump.
E Installation and Removal Belt Box Assembly
i)
Remove the belt hydraulic motor as follows:
(1) The hydraulic motor is located inside the head roller. It contains no user
serviceable parts. All repairs should be done through Slickbar Products
authorized personnel.
