7
Unscrew the housing (4 screws).
To have access to the connections you need to
loosen the screws and tilt the front panel out.
Carefully remove the housing.
Connect the USB cable adaptor into the socket.
Plug in the power cord.
Plug the USB cord into the PC.
Turn the station on.
Reprogram the station (see software manual).
Once the programming operation is done:
- Turn off the station.
- Unplug the power cord from the station.
- Unplug the USB cable from the PC and the station.
- Assemble the housing. Make sure that all the jumpers are properly connected.
- Screw the housing.
JT/TE Hot Air Stations