5
Unscrew the housing (5 screws).
Connect the USB cable adaptor into the front
circuit socket.
Carefully remove the housing.
Place the lid back on without screwing it.
Plug the power cord.
Plug the USB cord to the PC.
Turn the station ON.
Reprogram the station (see software manual).
Once the programming operation is done:
- Turn off the station.
- Unplug the power cord from the station.
- Unplug the USB cable from the PC and the station.
- Assemble the lid. Make sure that all the jumpers are properly connected.
- Screw the housing.
COMPACT LINE UNITS